Kimiko Rev2 Split Keyboard PCB

Kimiko Rev2 Split Keyboard - complete assembled keyboard

€18.00*

€15.13 excl. sales tax

* Prices incl. VAT (if any) plus shipping (and customs duties, if any)

Variant

MX Black PCB

Parts Kit

Product number: KC10214_MX-BK

Product information "Kimiko Rev2 Split Keyboard PCB"

Support for one rotary encoder on each half (two possible positions)
Per key RGB LED support with SK6812 Mini-E (easier to solder as normal SK6812 Mini)
Switches are hotswappable via MX Hotswap Sockets
MX switches and clones are compatible (3Pin/5Pin) (not Choc)
LeadFree HASL PCB surface finish

Variant includes:

MX Black PCB: 2pcs PCB's (no solder parts)
Parts Kit: 62x SMD Diodes / 2x Tactile reset switch / 2x TRRS jack / 2x sockets for the oled display

You also need:

1x Solder parts kit (choose extra in dropdown)
62x MX Kailh Hot Swap sockets
62x MX switches
2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, Elite-C, ...)
Case
Keycaps
TRRS cable (4-pole)
Optional: 1-2 rotary encoders
Optional: 1-2 OLED SSD1306 display
Optional: 62x SK6812 Mini-E led's for per key light

Build-Guide (old build guide for Rev1, but it's very similar)
Build guide for Rev2 coming soon.

VIAL firmware information (QMK firmware is not done yet)
Pre-compile VIAL firmware hex file for Pro Micro and clones (use QMK Toolbox to flash)

Photos of the completed keyboard are for demonstration purposes only.
Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Safety information

Manufacturer: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com

Accessory Items

Durock

Durock MX Hotswap PCB Sockets 10 pcs

Compatible with Cherry MX switches and clones Compatible with Kailh Hotswap socket footprint Gold plated contacts Sold in packs of 10 (Quantity 1 = 10 sockets) Require a compatible PCB Technical specification: Rating voltage range: 2A AC to 12V AC/DC Rating current: 10μA DC to 10mA AC/DC Contact resistance: 200mΩ (maximum) Insulation resistance: 100mΩ (minimum) (100V DC) Withstand Voltage: AC100V(50-60Hz) Motion Force: 3.0kgf max Operating Life: 100 Cycles (can replace switches 100 times)

From €1.50*

Keycapsss

Kimiko Rev2 Plate Case - Triangle Edition Gold/Black

Includes: 2x Top plates gold/black (FR4 material) 2x Bottom plates gold/black (FR4 material) 2x 3mm clear acrylic oled cover Screws and spacer for MX (brass slotted screw) Self adhesive rubber feet (clear) Photos of the completed keyboard are for demonstration purposes only (only case included).

€34.00*

Rotary Encoder with switch Bourns PEC11L - Flatted Shaft

No Brand

Rotary Encoder with switch EC11

Brand: Bourns (PEC11L) Rotary encoder with switch function (on press down) Compact, low profile, metal bushing/shaft Shaft diameter = 6mm Detents on the encoder: tactile feedback as you turn the knob Encoder shape fit in a top plate switch cutout Technical data Shaft length: 15mm Shaft diameter: 6mm Detent: 20 Pulses per 360° Rotation: 20

From €2.90*

No Brand

TRRS Cable 4-pole 3.5mm jack 30cm 12inch

Length: 30cm 4 pole

From €5.90*

No Brand

SK6812 Mini-E RGB SMD Led

Sold in packs of 10 (Quantity 1 = 10 led's). not compatible with the normal CRKBD pcb Power supply voltage: +3.7~+5.5V Not 1to1 compatible with SK6812 MINI (different pinout) 0.2W Datasheet

From €2.70*

Keycapsss

Kimiko Acrylic Plate Case

Case includes: 2x 3mm acrylic top plate 2x 3mm acrylic bottom plate 2x Oled cover (3mm) Spacer and screws for MX switches (stainless steel screws with T6 Torx) Self adhesive rubber feet (clear) This case is only compatible with MX switches and clones. The Kailh Choc switches are not high enough to go through the 3mm plate.The acrylic plates have a bluish/green protection film. Photos of the completed keyboard are for demonstration purposes only (only case included).

€31.00*

[ Currently out of stock ]

No Brand

0xCB Helios - Pro Micro/Elite-C compatible MicroController with RP2040

Meet Helios, the RP2040 Controller with Pro Micro/Puchi-C/Elite-C compatible pinout, 16MB (128Mbit) of flash, Dual ARM Cortex-M0 @133MHz, and 264kB SRAM. ESD protection chip onboard Supports VBUS detection for split keyboards You can select VBUS instead of raw for the 5V pin to hook up an external USB port with the included D+ and D- pads while maintaining ESD protection. A default off red power LED that can be turn on via a jumper Blue user LED Level-shifter to drive 5V components Single button reset circuit which enables you to reset the board with a short click Enter the bootloader with a long (>500ms) click Open-source by 0xCB The Helios comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here. Example to compile the QMK firmware for the Helios (uf2 file, not hex).qmk compile -kb crkbd/rev1 -km via -e CONVERT_TO=helio

€16.00*

Kailh

Kailh Hotswap PCB Sockets 10 pcs

MX Sockets (PG1511) compatible with Cherry MX switches and clones Choc Sockets (PG1350) compatible with Kailh Low Profile switches Sold in packs of 10 (Quantity 1 = 10 sockets). Require a compatible PCB

Content: 10 Unit (€0.19* / 1 Unit)

From €1.50*

No Brand

0.91 OLED LCD Display 128x32 SSD1306 I2C

Supported keyboards from the shop: CRKBD, Lily58L, Kimiko and Plaid-Pad Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Display Color: White Pin Description: GND: Power Ground VCC: Power + (3.3V - 5V) SCL: Clock Line SDA: Data Line

From €5.90*

through hole connector single row socket headers series 315 12 position

Mill-Max

Single Row Socket Headers or Pins (Mill-Max Series 315)

Sockets does not include the Pins. These can be ordered separately from the Drop-Down Menu. Sockets 1x QTY includes 2pcs socket headers, for a Split-Keyboard you need 2x QTY (4pcs socket headers) Pitch: 0.100" (2.54mm) Contact Finish: Gold Header Datasheet Link Pin Datasheet Link Instead of the pins, you can use legs from diodes or resistors Pins Length: 0.250" (6.35mm) Diameter: 0.020" (0.51mm) For a Split-Keyboard you need 2 QTY (4x Sockets) Example how to use the sockets.

From €4.90*

Kimiko Plate Case - Triangle Edition Gold/Black

Keycapsss

Kimiko Rev1 Plate Case - Triangle Edition Gold/Black

€34.00*

[ Currently out of stock ]