Kimiko Rev1 Plate Case - Triangle Edition Gold/Black

Support for one rotary encoder on each half (two possible positions) Per key RGB LED support with SK6812 Mini-E (easier to solder as normal SK6812 Mini) Switches are hotswappable via Kailh MX Hotswap Sockets MX switches and clones are compatible (3Pin/5Pin) (not Choc) LeadFree HASL PCB surface finish Variant includes: MX Black PCB: 2pcs swapable pcb's (no solder parts) Parts Kit: 60x SMD Diodes / 2x Tactile reset switch / 2x TRRS jack / 2x sockets for the oled display You also need: 1x Solder parts kit (choose extra in dropdown) 60x MX Kailh Hot Swap sockets 60x MX switches 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...) Case Keycaps TRRS cable (4-pole) Optional: 1-2 rotary encoders Optional: 1-2 OLED SSD1306 display Optional: 60x SK6812 Mini-E led's for per key light QMK keymap available here. Build-Guide Drawings (SVG, DXF) to create your own case, can be found here.3D printable case by PahaniJulmu Test the LayoutPrint the linked PDF at 100% scale on a A4 page. Photos of the completed keyboard are for demonstration purposes only.Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.

  The Puchi-C is discontinued, due to it's old chip (Atmega32U) and better alternatives.I recommend the Helios. It's a 1:1 replacement for Pro-Micro, or Puchi-C, with more memory and ESD protection. The new Puchi-C Rev2 has castellated holes and is even lower (3.3mm). To make the Puchi-C low as possible, the reset button has been removed.Incorrect silkscreen labeling with this batch: Short edge connector D7 is B7 Due to the chip shortage, the price for the Atmega32u4 chip has tripled. That is why I had to raise the price. Compatible with all Pro Micro based PCB's Works with USB-A to USB-C and USB-C to USB-C cable ATmega32u4 controller Running at 16MHz and 5V USB-C connector (mid-mounted) DFU bootloader 5 additional ATmega32u4 pins and USB pins broken out Blue power led 24 IO pins, +5 pins (see pinout diagram for front and back view) The Puchi-C comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here.

Supported keyboards from the shop: CRKBD, Lily58L, Kimiko and Plaid-Pad Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Display Color: White   Pin Description:  GND: Power Ground VCC: Power + (3.3V - 5V) SCL: Clock Line SDA: Data Line