Products from Keycapsss

USB-C connector MX and Choc switch support Top left and top right can be replaced with a rotary encoder Only through-hole parts ATMEGA328P a controller QMK Firmware Great companion to the Plaid keyboard Build Guide This is the pre...

Cherry profile 151keycaps PBT material Compatible with Cherry MX and MX-Style clones

Gold Edition features: USB-C connector MX and Choc switch support Gold plated solder pads Bootloader and default keymap already flashed on the ATMEGA328p chip. Solder parts on the pcb, connect it with a pc and start typing. only...

Includes: 2x Top plates gold/black 2x Bottom plates gold/black 2x 2mm clear acrylic oled cover 28x M2x5mm brass screws 14x M2x8mm brass spacer 8x Clear rubber feeds You also need: PCB (mid for the switches and Pro Micro) 2x Pro Micro...

This is an optional top plate for the Plaid Kit . With this top plate, you can use plate mounted switches like Kailh Box on your Plaid keyboard. Includes: 1x Acrylic top plate for Plaid keyboard 6x M2x8mm brass screws 6x 2mm acrylic...

Case includes: 2x 3mm acrylic top plate 2x 3mm acrylic bottom plate 2x Oled cover 28x M2 5mm brass screws 10x M2 6mm brass spacer 4x M2 10mm brass spacer

Compatible with Cherry MX switches and clones. Design by OmNomNomagon

This case is compatible with the ErgoDash Rev1.2 pcb . Compatible with MX switches and clones like Gateron. Includes: 2x Acrylic 3mm top plates 2x Acrylic 3mm bottom plates 2x Acrylic 3mm bottom guard plate 16x M2 6mm brass spacer 26x M2...

This carbon top plate fit's to the Planck HI-PRO bottom case from OLKB . Supports MIT, GRID layout and 2x 2U Compatible with Cherry MX keyswitches, and MX clones (Gateron, Kailh, Zealio …) Plate is 1.5 mm thick Material Carbon With top...

1pc = 25 Single-Switch PCB's you need Kailh Hot Swap Sockets MX and 1N4148W SMD Diode (Size: SOD123) makes you handwired build cleaner (Dactyl-Manuform) ability to add 4Pin RGB LEDs Grid spacing: 19mm PCB design by ogatatsu ( Github )

Supports Kailh MX and Choc Hotswap Sockets MX and Choc (low profile) switches are compatible Separate solder parts kit includes: 58x SMD Diodes 1N4148W 2x Tactile reset switch 2x TRRS jack You need: 1x Solder parts kit (choose extra in...

This case is only compatible with the MX version of the pcb. The Choc switches are not heigh enough to go through the 3mm top plate. For Choc i recommend the carbon plate case . The switches snap into the plate and carbon is very stiff....