CRKBD Split Keyboard PCB (Corne, Helidox)

Length: 80cm/31,5inch

Length: 30cm 4 pole

This case is only compatible with the MX version of the pcb. The Choc switches are not heigh enough to go through the 3mm top plate.For Choc i recommend the carbon plate case. The switches snap into the plate and carbon is very stiff. This carbon case is compatible with MX and Choc version.  Includes: 2x Acrylic 3mm top plates 2x Acrylic 3mm bottom plates 2x Acrylic 3mm clear Oled cover (has bluish protection film) Screws and spacer (stainless steel screws with T6 Torx) Self adhesive rubber feet (clear) Photos of the completed keyboard are for demonstration purposes only (only case included).   

Supported keyboards from the shop: CRKBD, Lily58L, Kimiko and Plaid-Pad Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Display Color: White   Pin Description:  GND: Power Ground VCC: Power + (3.3V - 5V) SCL: Clock Line SDA: Data Line  

For CRKBD (Corne) split keyboard keyboard (only for V3 and below) Set for left and right half Variant: Top 3mm precut Poron foam Place between top plate and pcb Variant: Mid (Cherry) Compatible with Corne V3 Cherry (Hot-Swap) 2mm precut Poron foam  Place between pcb and bottom plate  

Sold in packs of 10 (Quantity 1 = 10 led's).Power supply voltage: +3.7~+5.5VNot 1to1 compatible with SK6812 MINI (different pinout)0.2WDatasheet

Sold in packs of 10 (Quantity 1 = 10 led's).   WS2812C (fully compatible with WS2812B) Footprint: SMD 5050 (5x5mm) Wavelength: 620~625nm Red, 515~525nm Green, 465~475nm Blue Luminous Intensity (IF=20mA): 60mcd@5mA Red, 245mcd@5mA Green, 365mcd@5mA Blue Power supply voltage (VDD): +3.5~+5.3V Operation junction temperature: -25~+85 °C

  MX Sockets (PG1511) compatible with Cherry MX switches and clones Choc Sockets (PG1350) compatible with Kailh Low Profile switches Sold in packs of 10 (Quantity 1 = 10 sockets). Require a compatible PCB  

Compatible with many split keyboard pcb. keeb.io (Levinson, Nyquist) Corne(Crkbd), ErgoDash, ErgoDash Mini, Lily58, minisplit, Split Infinitive

Sockets does not include the Pins. These can be ordered separately from the Drop-Down Menu. Sockets 1x QTY includes 2pcs socket headers (for a Split-Keyboard you need 2x QTY (4pcs socket headers)) Pitch: 0.100" (2.54mm) Contact Finish: Gold Instead of the pins, you can use legs from diodes/resistors, or these needle pins. Pins Length: 0.250" (6.35mm) Diameter: 0.020" (0.51mm) Example how to use the sockets.

Product images need updating. You will receive a Black/Gold case. Unique design by Keycapsss Color: Black/Gold Thickness: 1.6mm Compatible with MX and Choc switches (7mm M2 spacer incl.) Material: PCB material (FR4 lead free)   Set includes: 2x Top plates 2x Bottom plates 2x Oled clear guard plates 3mm thick (with bluish removable protection film) M2 stainless steel screws (T6 Torx) M2 spacer (7mm for MX, for Choc switches 5mm spacer are possible, order separate) Self adhesive rubber feet (clear) Photos of the completed keyboard are for demonstration purposes only (only case included). 

  The Puchi-C is discontinued, due to it's old chip (Atmega32U) and better alternatives.I recommend the Helios. It's a 1:1 replacement for Pro-Micro, or Puchi-C, with more memory and ESD protection. The new Puchi-C Rev2 has castellated holes and is even lower (3.3mm). To make the Puchi-C low as possible, the reset button has been removed.Incorrect silkscreen labeling with this batch: Short edge connector D7 is B7 Due to the chip shortage, the price for the Atmega32u4 chip has tripled. That is why I had to raise the price. Compatible with all Pro Micro based PCB's Works with USB-A to USB-C and USB-C to USB-C cable ATmega32u4 controller Running at 16MHz and 5V USB-C connector (mid-mounted) DFU bootloader 5 additional ATmega32u4 pins and USB pins broken out Blue power led 24 IO pins, +5 pins (see pinout diagram for front and back view) The Puchi-C comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here.

Thickness: 2mm Material: EPDM Self-adhesive Includes: Foam for left and right side

This is a plate case for the open source CRKBD split keyboard. Holes for the standoff are M2 size. 2x Top plates 100% Carbon (1.5mm thick) 2x Bottom plates 100% Carbon (1.5mm thick) 2x Acrylic Oled cover (2mm thick), after removing the blue protection tape, the cover is colorless Self adhesive rubber feet (clear) Screws and spacer (stainless T6 Torx) Photos of the completed keyboard are for demonstration purposes only (only case included).