Kimiko Rev1 Split Keyboard PCB
€18.00
Description
- Support for one rotary encoder on each half (two possible positions)
- Per key RGB LED support with SK6812 Mini-E (easier to solder as normal SK6812 Mini)
- Switches are hotswappable via Kailh MX Hotswap Sockets
- MX switches and clones are compatible (3Pin/5Pin) (not Choc)
- LeadFree HASL PCB surface finish
Variant includes:
- MX Black PCB: 2pcs swapable pcb's (no solder parts)
- Parts Kit: 60x SMD Diodes / 2x Tactile reset switch / 2x TRRS jack / 2x sockets for the oled display
You also need:
- 1x Solder parts kit (choose extra in dropdown)
- 60x MX Kailh Hot Swap sockets
- 60x MX switches
- 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...)
- Case
- Keycaps
- TRRS cable (4-pole)
- Optional: 1-2 rotary encoders
- Optional: 1-2 OLED SSD1306 display
- Optional: 60x SK6812 Mini-E led's for per key light
QMK keymap available here.
Drawings (SVG, DXF) to create your own case, can be found here.
3D printable case by PahaniJulmu
Test the Layout
Print the linked PDF at 100% scale on a A4 page.
Photos of the completed keyboard are for demonstration purposes only.
Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.
Reviews 0
Login
Safety information
Manufacturer: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com
Accessory Items
Brand: Bourns (PEC11L) Rotary encoder with switch function (on press down) Compact, low profile, metal bushing/shaft Shaft diameter = 6mm Detents on the encoder: tactile feedback as you turn the knob Encoder shape fit in a top plate switch cutout Technical data Shaft length: 15mm Shaft diameter: 6mm Detent: 20 Pulses per 360° Rotation: 20
Sold in packs of 10 (Quantity 1 = 10 led's).Power supply voltage: +3.7~+5.5VNot 1to1 compatible with SK6812 MINI (different pinout)0.2WDatasheet
Case includes: 2x 3mm acrylic top plate 2x 3mm acrylic bottom plate 2x Oled cover (3mm) Spacer and screws for MX switches (stainless steel screws with T6 Torx) Self adhesive rubber feet (clear) This case is only compatible with MX switches and clones. The Kailh Choc switches are not high enough to go through the 3mm plate.The acrylic plates have a bluish/green protection film. Photos of the completed keyboard are for demonstration purposes only (only case included).
Currently not available
MX Sockets (PG1511) compatible with Cherry MX switches and clones Choc Sockets (PG1350) compatible with Kailh Low Profile switches Sold in packs of 10 (Quantity 1 = 10 sockets). Require a compatible PCB
Content: 10 Unit (€0.19 / 1 Unit)
Supported keyboards from the shop: CRKBD, Lily58L, Kimiko and Plaid-Pad Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Display Color: White Pin Description: GND: Power Ground VCC: Power + (3.3V - 5V) SCL: Clock Line SDA: Data Line
Sockets does not include the Pins. These can be ordered separately from the Drop-Down Menu. Sockets 1x QTY includes 2pcs socket headers (for a Split-Keyboard you need 2x QTY (4pcs socket headers)) Pitch: 0.100" (2.54mm) Contact Finish: Gold Instead of the pins, you can use legs from diodes/resistors, or these needle pins. Pins Length: 0.250" (6.35mm) Diameter: 0.020" (0.51mm) Example how to use the sockets.
Includes: 2x Top plates gold/black (FR4 material) 2x Bottom plates gold/black (FR4 material) 2x 3mm clear acrylic oled cover Screws and spacer for MX (brass slotted screw) Self adhesive rubber feet (clear) Photos of the completed keyboard are for demonstration purposes only (only case included).
Currently not available
Meet Helios, the RP2040 Controller with Pro Micro/Puchi-C/Elite-C compatible pinout, 16MB (128Mbit) of flash, Dual ARM Cortex-M0 @133MHz, and 264kB SRAM. ESD protection chip onboard Supports VBUS detection for split keyboards You can select VBUS instead of raw for the 5V pin to hook up an external USB port with the included D+ and D- pads while maintaining ESD protection. A default off red power LED that can be turn on via a jumper Blue user LED Level-shifter to drive 5V components Single button reset circuit which enables you to reset the board with a short click Enter the bootloader with a long (>500ms) click Open-source by 0xCB The Helios comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here. Example to compile the QMK firmware for the Helios (uf2 file, not hex).qmk compile -kb crkbd/rev1 -km via -e CONVERT_TO=helios
Currently not available