Lily58 / Lily58L Split Keyboard PCB

Sold in packs of 10 (Quantity 1 = 10 led's).   WS2812C (fully compatible with WS2812B) Footprint: SMD 5050 (5x5mm) Wavelength: 620~625nm Red, 515~525nm Green, 465~475nm Blue Luminous Intensity (IF=20mA): 60mcd@5mA Red, 245mcd@5mA Green, 365mcd@5mA Blue Power supply voltage (VDD): +3.5~+5.3V Operation junction temperature: -25~+85 °C

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or control to your Keyboard, Raspberry Pi or Arduino projects. We've taken a trackball module from everyone's favourite fruit-flavoured phone and added a bunch of clever engineering to let you build old-school interaction into your projects. As well as x/y directional tracking and click, we've added an RGBW (red/green/blue/white) LED right under the clear trackball to illuminate it and allow you to add visual feedback.Use Trackball Breakout with an Arduino that supports USB HID to use it as a tiny mouse. Or why not use it as a colour/brightness control for an LED matrix breakout or a set of our Mote lights?Because the trackball has a grippy rubber surface you can also use it with the trackball facing downwards and track it as it rolls on a surface, like a traditional roller ball mouse.It's compatible with our fancy Breakout Garden HAT (and pHAT), where using breakouts is as easy just popping it into one of the six slots and starting to grow your project, create, and code. Features Mini trackball with click button RGBW LEDs beneath trackball for illumination Moulded plastic trackball casing Mounting holes Nuvoton N76E003AQ20 MCU I2C interface (address 0x0A/0x0B (cut trace)) 3.3V or 5V compatible Reverse polarity protection Compatible with all models of Raspberry Pi, and Arduino Python library   Kit includes Trackball breakout 1x5 male header 1x5 female right-angle header We've designed this breakout board so that you can solder on the piece of right angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 7, 9). Software We've put together a Python library for Trackball Breakout that makes it simple to read directional values, click events, and set the LED colour. Theres a handful of examples of how to read the direction and click, make the LEDs rainbow, and use it as a mouse in Raspbian. Notes The trackball breakout only works reliably with I2C speeds up to 250kHz due to limitations in the Raspberry Pi's clock-stretching implementation Dimensions: 25x22x9.5mm

Case includes: 2x 3mm acrylic top plate 2x 3mm acrylic bottom plate 2x Oled cover (2mm) Spacer and screws for MX switches (stainless steel screws with T6 Torx) Self adhesive rubber feet (clear) This case is only compatible with MX switches and clones. The Kailh Choc switches are not high enough to go through the 3mm plate. The acrylic plates have a bluish/green protection film. Photos of the completed keyboard are for demonstration purposes only (only case included). 

Sold in packs of 10 (Quantity 1 = 10 led's).Power supply voltage: +3.7~+5.5VNot 1to1 compatible with SK6812 MINI (different pinout)0.2WDatasheet

  The Puchi-C is discontinued, due to it's old chip (Atmega32U) and better alternatives.I recommend the Helios. It's a 1:1 replacement for Pro-Micro, or Puchi-C, with more memory and ESD protection. The new Puchi-C Rev2 has castellated holes and is even lower (3.3mm). To make the Puchi-C low as possible, the reset button has been removed.Incorrect silkscreen labeling with this batch: Short edge connector D7 is B7 Due to the chip shortage, the price for the Atmega32u4 chip has tripled. That is why I had to raise the price. Compatible with all Pro Micro based PCB's Works with USB-A to USB-C and USB-C to USB-C cable ATmega32u4 controller Running at 16MHz and 5V USB-C connector (mid-mounted) DFU bootloader 5 additional ATmega32u4 pins and USB pins broken out Blue power led 24 IO pins, +5 pins (see pinout diagram for front and back view) The Puchi-C comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here.

  MX Sockets (PG1511) compatible with Cherry MX switches and clones Choc Sockets (PG1350) compatible with Kailh Low Profile switches Sold in packs of 10 (Quantity 1 = 10 sockets). Require a compatible PCB  

Supported keyboards from the shop: CRKBD, Lily58L, Kimiko and Plaid-Pad Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Display Color: White   Pin Description:  GND: Power Ground VCC: Power + (3.3V - 5V) SCL: Clock Line SDA: Data Line  

  Includes: 2x Top plates gold/black (FR4 material) 2x Bottom plates gold/black (FR4 material) 2x 3mm clear acrylic oled cover Screws and spacer for MX (brass slotted screw) 8x Rubber feets (clear) You also need: PCB 2x Pro Micro or Puchi-C Solder Parts Kit 58x Kailh Sockets (MX) 58x Switches (MX 3Pin/5Pin) Keycaps