World wide shipping with tracking
German Vendor

Puchi-C - Pro Micro replacement with USB-C and ATmega32U4

€17.90 *

Prices incl. VAT plus shipping costs

Ready to ship,
Delivery time 2-5 workdays (Germany),
appr. 5-14 workdays (EU),
appr. 14-50 workdays (International)

  • KC10106
The new Puchi-C Rev2 has  castellated holes and is even lower (3.3mm). To make the... more

The new Puchi-C Rev2 has castellated holes and is even lower (3.3mm). To make the Puchi-C low as possible, the reset button has been removed.
Incorrect silkscreen labeling with this batch: Short edge connector D7 is B7

Due to the chip shortage, the price for the Atmega32u4 chip has tripled. That is why I had to raise the price.

  • Compatible with all Pro Micro based PCB's
  • Works with USB-A to USB-C and USB-C to USB-C cable
  • ATmega32u4 controller
  • Running at 16MHz and 5V
  • USB-C connector (mid-mounted)
  • DFU bootloader
  • 5 additional ATmega32u4 pins and USB pins broken out
  • Blue power led
  • 24 IO pins, +5 pins (see pinout diagram for front and back view)

The Puchi-C comes without header pins, to keep the price low as possible.
I highly reccommend to use the "Single Row Sockets" from Mill-Max, or the "Spring-loaded pin headers".
If you still want the standard pin header, you can find them here.




Related links to "Puchi-C - Pro Micro replacement with USB-C and ATmega32U4"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "Puchi-C - Pro Micro replacement with USB-C and ATmega32U4"
4 May 2021

Stylish Elite-C alternative

I'm not too versed with MCUs, but this one has it all. Great design, mid-mounted USB-C port for low profile and you can use it anywhere you could have used Pro Micro or Elite-C, at a very competitive price.

Also works in conjunction with Pro Micros (on split keyboards) effortlessly, as expected.

Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.