Products from No Brand
No results were found for the filter!
Low Stock
Switch Tester Base for Mechanical Keyboard Switches 5x6 switch positions 3d printed with PLA Dimensions: 12x10x2cm incl. 4x rubber feet Printed with Redline Filament Open Source by Jamie Hamel-Smith
€7.40 *
Aluminium Knob for Rotary Encoder with 6mm Knurled Shaft Outer Material: Aluminum Inner Hole Diameter: 6mm (0.24in) Outer Diameter: 15mm / Height: 16mm
€3.40 *
Aluminium Knob for Rotary Encoder with 6mm Flatted Shaft Material: Aluminum Inner Hole Diameter: 6mm (0.24in) Size: Dia:12.5mm H:15mm (0.492in x 0,59in)
€4.90 *
Sold Out
OEM Pudding Keycaps Backlit PBT Doubleshot for MX Switches ANSI/ISO Black Color: black (top half), translucent milky white (lower half) ANSI or ISO layout PBT Double-Shot plastic 144 keycaps Photos of the completed keyboard are for demonstration purposes. This product includes only keycaps.
€32.00 *
Single Row Socket Headers 2.54 Pitch Cheaper alternative to the Mill-Max Series 315 sockets 1 Qty = 1 socket row with 40x pin holes Easy split to needed length with a flush cutter Pitch: 0.100" (2.54mm) Both variants work with the Mill-Max 315 pins, but looser than with the...
From €2.90 *
Sold Out
Pro Micro USB-C 5V 16MHz ATmega32u4 Microcontroller New version with USB-C connector Same Pinout as standard Pro Micro (Mirco-USB) Slightly longer (total length 37mm, standard is 33.5mm) ATmega32U4 chip Running at 16MHz and 5V Power supply up to 12V (DIOs only 5V) 4x 10-bit ADC channels,...
€12.90 *
Backorder
3W6 RP2040 Split Keyboard Kit This is the new 3w6 RP2040 version. Instead of the old ATmega32U4, it uses a modern RP2040 32-bit dual ARM microcontroller. New features: Onboard controller (RP2040) on both sides 4MB (32Mbit) QSPI flash and 264 KB SRAM Full Duplex UART...
€82.00 *
MX Relegendable / Double-Layer Keycaps 1U/2U Great for Macro Pads like the Plaid-Pad, or Keybow Legend area is 1U:13x13mm / 2U: 13x32.5mm Keycap dimension 1U:18x18mm / 2U: 18x37mm High (8mm) is lower as OEM/Cherry keycaps Label/Sticker are not included (print your own)
Content 2 Unit
From €2.90 *
Silicone Keycap Mold for MX OEM DIY Resin Artisan Keycaps Create customize keycaps with UV resin or 2 component resin. Paw: 6x Kitty Paw Mold R1-1: 2x 2.25U + 2.75U + 6U Mold R1-2: 3x 1U + 2x 1.25U Mold R2: 4x 1U + 1x 1.75U Mold R3: 4x 1U + 1x 1.5U Mold R4: 4x 1U + 1x 2U
From €3.00 * €5.90 *
Foam Switch Pads 120 pcs per pack Thickness: 0.5mm Material: Industrial Polyurethanes Weight: 18g Self-adhesive (backside) Buffer force during typing and change the switch sound Variant Hot-Swap Support for 3pin and 5pin switches Hole for RGB LED Size:...
€8.90 *
NP Profile PBT Numpad Keycaps 28 keys Profile: NP Material: PBT 28 keys MX compatible Photos of the completed keyboard are for demonstration purposes only. This product includes only keycaps.
€17.90 * €19.90 *
MxLEDBit Single Switch PCB - MX Choc Hot Swap Socket Variant Variant Single PCB Qty Switch Kailh Hot Swap Socket Switch LED Diode Choc 25 Choc V1 (no V2) No SK6812 Mini-E SOD-123 MX 25 MX switches and clones No SK6812 Mini-E Through-Hole, SOD-123* MX (Hot Swap) 25 MX switches and clones...
From €1.50 *
Viewed