Corne Split Keyboard (crkbd, helidox) Acrylic Plate Case
Description
This case is only compatible with the MX version of the pcb. The Choc switches are not heigh enough to go through the 3mm top plate.
For Choc i recommend the carbon plate case. The switches snap into the plate and carbon is very stiff.
This carbon case is compatible with MX and Choc version.
Includes:
- 2x Acrylic 3mm top plates
- 2x Acrylic 3mm bottom plates
- 2x Acrylic 3mm clear Oled cover (has bluish protection film)
- Screws and spacer (stainless steel screws with T6 Torx)
- Self adhesive rubber feet (clear)
Photos of the completed keyboard are for demonstration purposes only (only case included).
Reviews 2
Login
2 reviews
5 October 2021 20:49
Simple yet nice case
The case looks really nice and protects the PCB from below. Mine had extra screws, and a nice sticker.
6 June 2019 15:28
Just as described
Pretty solid acrylic plate, once fully assembled everything feels solid yet light.
Mine was missing 2 screws so I didn't attach the second Oled Cover, but overall the thing was really well packaged and it even included an awesome sticker ! I rate it 9/10 because I think it's a little bit pricey.
Safety information
Manufacturer: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com
Accessory Items
Variants MX PCB: This is the standard V3.0.1 version of the CRKBD Split Keyboard PCB Includes 2x MX PCB v3.0.1 [Build Guide] Uses WS2812 LED for underglow This PCB version works only with Kailh MX Hot Swap sockets (PG1511) & Cherry MX and clone switches. You also need the Parts Kit (choose from drop down menu), 42x MX switches, 42x Kailh MX Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light) and 12x WS2812 5x5mm (underglow) for both sides. Choc PCB: V3.2 Choc PCB with support for SK6812 Mini-E for per key LEDs (LED order are the same), NEW batterie solder points and optional on/off switch for wireless builds Includes 2x Choc PCB Uses WS2812 for underglow Support for Choc V1 and V2 switches You also need the Parts Kit (choose from drop down menu), 42x Choc switches, 42x Kailh Choc Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX or Choc Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light)and 12x WS2812 5x5mm (underglow) for both sides. Optional: 2x on/off switches for a wireless build Light PCB: This is the Light V2.0.0 version of the CRKBD Split Keyboard PCB Includes 2x Light PCB v2.0.0 [Build Guide] Support for MX, Choc V1 and Choc V2 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away No RGB LEDs, No Hot-Swap You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1/ChocV2 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, Keycaps, OLED SSD1306 0.91 (optional) UltraLight: This is the UltraLight V2.0.0 version of the CRKBD Split Keyboard PCB (very similar to the Light PCB, but optimised for wireless builds) Includes 2x UltraLight PCB v2.0.0 Support for MX, Choc V1 and Gateron KS-27 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away No RGB LEDs, No Hot-Swap Support for an On/Off switch, battery JST socket and solder points for the nice!view You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, Nice!Nano), Keycaps, Nice!View (optional) and 2x on/off switch Parts Kit includes: 42x SMD Diodes 2x TRRS Jacks 2x Reset Switches 2x 4Pin Sockets (for Oled) Photos of the completed keyboard are for demonstration purposes only.Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps. PCB design by foostan UltraLight PCB design by Pete Johanson
All covers are 3mm thick For the corne (crkbd, helidox) plate case. Includes 2x acrylic oled covers of the choosen color 4x M2x5mm screws (torx t6 stainless) You also need: 4x M2x8mm plastic screws/nuts (only Pimoroni trackball plate)
Similar Items
This is a plate case for the open source CRKBD split keyboard. Holes for the standoff are M2 size. 2x Top plates 100% Carbon (1.5mm thick) 2x Bottom plates 100% Carbon (1.5mm thick) 2x Acrylic Oled cover (2mm thick), after removing the blue protection tape, the cover is colorless Self adhesive rubber feet (clear) Screws and spacer (stainless T6 Torx) Photos of the completed keyboard are for demonstration purposes only (only case included).
Currently not available
Product images need updating. You will receive a Black/Gold case. Unique design by Keycapsss Color: Black/Gold Thickness: 1.6mm Compatible with MX and Choc switches (7mm M2 spacer incl.) Material: PCB material (FR4 lead free) Set includes: 2x Top plates 2x Bottom plates 2x Oled clear guard plates 3mm thick (with bluish removable protection film) M2 stainless steel screws (T6 Torx) M2 spacer (7mm for MX, for Choc switches 5mm spacer are possible, order separate) Self adhesive rubber feet (clear) Photos of the completed keyboard are for demonstration purposes only (only case included).