ErgoDash Split Keyboard PCB

ErgoDash Mechanical Split Keyboard PCB Black MX

ErgoDash Acrylic Plate Case Split Keyboard - 4-Key Thumb Cluster

ErgoDash Acrylic Plate Case Split Keyboard RGB Underglow

€18.90*

€15.88 excl. sales tax

* Prices incl. VAT (if any) plus shipping (and customs duties, if any)

Product number: KC10032

Product information "ErgoDash Split Keyboard PCB"

MX PCB:

includes 2x ErgoDash PCB Rev1.2
compatible with Cherry MX switches and Mx Clonse like Durock, Kailh, Gateron ... (not Choc)

You need the following solder parts:

70x 1N4148 diodes
2x TRRS jack
2x MJTP1117 switch
Optional 70x 470Ω resistor (for key backlight leds)
Optional 2x 1kΩ resistor (for key backlight leds)
Optional 2x MOSFET IRLML6344TRPBF 30V 5A 1.1V (for key backlight leds)

What else do you need:

TRRS cable × 1
USB-C or Micro USB cable × 1 (Helios USB-C)
Arduino Pro Micro × 2 or Helios
66-70 MX switches
Keycaps
Optional: LED WS2812B × 24 (for underglow)
Optional: LED 1.8mm × 66-70 (for key backlight)

Build Guide

A 3D printable case can be found here.

Photos of the completed keyboard are for demonstration purposes only.
Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.

PCB design by omkbd

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Safety information

EU responsible person: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com

Accessory Items

No Brand

0xCB Helios - Pro Micro/Elite-C compatible MicroController with RP2040

Color: Black

Meet Helios, the RP2040 Controller with Pro Micro/Puchi-C/Elite-C compatible pinout, 16MB (128Mbit) of flash, Dual ARM Cortex-M0 @133MHz, and 264kB SRAM. ESD protection chip onboard Supports VBUS detection for split keyboards You can select VBUS instead of raw for the 5V pin to hook up an external USB port with the included D+ and D- pads while maintaining ESD protection. A default off red power LED that can be turn on via a jumper Blue user LED Level-shifter to drive 5V components Single button reset circuit which enables you to reset the board with a short click Enter the bootloader with a long (>500ms) click Open-source by 0xCB The Helios comes without header pins, to keep the price low as possible.I highly reccommend to use the "Single Row Sockets" from Mill-Max, the cheaper alternative, or the "Spring-loaded pin headers".You can find the standard pin header here. Example to compile the QMK firmware for the Helios (uf2 file, not hex).qmk compile -kb crkbd/rev1 -km via -e CONVERT_TO=helios

€16.00*

Details

No Brand

2x TRRS jacks 3.5mm

Compatible with many split keyboard pcb. keeb.io (Levinson, Nyquist) Corne(Crkbd), ErgoDash, ErgoDash Mini, Lily58, minisplit, Split Infinitive

€2.40*

Details

No Brand

TRRS Cable 4-pole 3.5mm jack 30cm 12inch

Color: Black

Length: 30cm 4 pole

€5.90*

Details

No Brand

TRRS Cable 4-pole 3.5mm jack 80cm 31.5inch

Length: 80cm/31,5inch

€8.90*

Details

No Brand

WS2812 RGB Led's 10PCS

Sold in packs of 10 (Quantity 1 = 10 led's). WS2812C (fully compatible with WS2812B) Footprint: SMD 5050 (5x5mm) Wavelength: 620~625nm Red, 515~525nm Green, 465~475nm Blue Luminous Intensity (IF=20mA): 60mcd@5mA Red, 245mcd@5mA Green, 365mcd@5mA Blue Power supply voltage (VDD): +3.5~+5.3V Operation junction temperature: -25~+85 °C

From €2.40*

Details

Similar Items

Corne Split Keyboard PCB - Kailh Hot Swap MX - CRKBD Mini-E

Keycapsss

CRKBD Split Keyboard PCB (Corne, Helidox)

Variants MX PCB: This is the standard V3.0.1 version of the CRKBD Split Keyboard PCB Includes 2x MX PCB v3.0.1 [Build Guide] Uses WS2812 LED for underglow This PCB version works only with Kailh MX Hot Swap sockets (PG1511) & Cherry MX and clone switches. You also need the Parts Kit (choose from drop down menu), 42x MX switches, 42x Kailh MX Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light) and 12x WS2812 5x5mm (underglow) for both sides. Choc PCB: V3.2 Choc PCB with support for SK6812 Mini-E for per key LEDs (LED order are the same), NEW batterie solder points and optional on/off switch for wireless builds Includes 2x Choc PCB Uses WS2812 for underglow Support for Choc V1 and V2 switches You also need the Parts Kit (choose from drop down menu), 42x Choc switches, 42x Kailh Choc Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX or Choc Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light)and 12x WS2812 5x5mm (underglow) for both sides. Optional: 2x on/off switches for a wireless build Light PCB: This is the Light V2.0.0 version of the CRKBD Split Keyboard PCB Includes 2x Light PCB v2.0.0 [Build Guide] Support for MX, Choc V1 and Choc V2 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away No RGB LEDs, No Hot-Swap You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1/ChocV2 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, Keycaps, OLED SSD1306 0.91 (optional) UltraLight: This is the UltraLight V2.0.0 version of the CRKBD Split Keyboard PCB (very similar to the Light PCB, but optimised for wireless builds) Includes 2x UltraLight PCB v2.0.0 Support for MX, Choc V1 and Gateron KS-27 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away No RGB LEDs, No Hot-Swap Support for an On/Off switch, battery JST socket and solder points for the nice!view You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, Nice!Nano), Keycaps, Nice!View (optional) and 2x on/off switch Parts Kit includes: 42x SMD Diodes 2x TRRS Jacks 2x Reset Switches 2x 4Pin Sockets (for Oled) Photos of the completed keyboard are for demonstration purposes only.Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps. PCB design by foostan UltraLight PCB design by Pete Johanson

From €8.00*

Details