Forager Wireless Split Keyboard Kit
€149.00*
€125.21 excl. sales tax
Product information "Forager Wireless Split Keyboard Kit"
The Forager is a Voyager-inspired 34-key low-profile split keyboard. It is wireless and powered by ZMK firmware.
- Pre flashed ZMK firmware with ZMK Studio support
- Hot-swap sockets for Choc V1 switches (change switches without soldering)
- Choc (18x17mm) spacing for a compact design
- Magnetic tenting legs
- Case top plate has switch puller grooves
- A Seeed XIAO nRF52840 is used as the core of the Forager
- RGB led to indicate battery level and BLE connection status
- Reset button on the bottom
The ZMK firmware is already flashed and has ZMK Studio support. This allows you to easily change the layout without having to flash a new firmware.
You can find the Build-Guide and more information here.
The includes:
- Forager PCB (left, right side) fully assembled
- Case (3D printed with black PLA)
- 4x tenting feet (3D printed with black PLA)
- Screws (black countersunk M2x4 screws with spare screw)
- Rubber feets
- Torx T6 screwdriver
You also need:
- 34x Choc V1 switches
- 34x Choc V1 keycaps
- 2x LiPo 1S 3.7V battery (optional with a JST ACH connector)
Login
2 reviews
30 May 2025 15:25
The Forager is my favorite keyboard so
The Forager is my favorite keyboard so far. It is a smaller, wireless version of the Voyager - roughly 80g and perhaps 1-2 mm taller than the Voyager. After using it for 2 weeks, I haven't noticed any lags and it is much more portable than the Voyager as it has no wires. It can connect to multiple devices at once, but only sends keystrokes to the active bluetooth profile which is very convenient. The build process took about 30min (the trickiest part was installing the battery) and Ben was very helpful on the Discord. After build, ZMK Studio allows very basic keymapping changes and works out of the box. To do more complex changes, rebuilding the firmware is required, but that was also very straightforward for a first-time ZMK user using https://github.com/carrefinho/forager-zmk-module and instructions from https://zmk.dev/docs/user-setup#installing-the-firmware More pics and comparison to the Voyager is at the discord thread https://discord.com/channels/548530462419582996/1362450921258356879/1374535867141459988 At 150 Euros, this is a bargain compared to the Voyager.
24 March 2025 12:52
Nicely put together and assembled kit, good
Nicely put together and assembled kit, good keyboard!
Safety information
Manufacturer: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com