Unfortunately, this product is no longer available
Similar products:
Sold Out
Puchi-C - Pro Micro replacement with USB-C and ATmega32U4
The Puchi-C is discontinued, due to it's old chip (Atmega32U) and better alternatives. I recommend the Helios . It's a 1:1 replacement for Pro-Micro, or Puchi-C, with more memory and ESD protection. The new...
€16.90 *
Sold Out
Pro Micro USB-C 5V 16MHz ATmega32u4 Microcontroller
New version with USB-C connector Same Pinout as standard Pro Micro (Mirco-USB) Slightly longer (total length 37mm, standard is 33.5mm) ATmega32U4 chip Running at 16MHz and 5V Power supply up to 12V (DIOs only 5V) 4x...
€12.90 *
Sold Out
Emoji/Smiley - MX R4, OEM, ABS Etched, Backlight
Profile: OEM Material: ABS Backlight (Shine-Through) This keycap an be used at the red marked area (OEM).
€9.90 *
Sold Out
HHKB Style Planck compatible Carbon Top Plate for LO-PRO Case (ortholinear keyboard)
This carbon top plate fit's to the Planck Lo-Pro bottom case from OLKB . Supports MIT and GRID layout Compatible with Cherry MX keyswitches, and MX clones (Gateron, Kailh, Zealio …) Plate is 1.5 mm thick Material: Carbon...
From €29.90 *
Sold Out
Crystal Artisan Keycap
This keycap is hand painted. The crystals have a transition from almost transparent to colored (top to bottom). It has a strong varnish (Premium Acrylic Polyurethane), to protect the paint. Compatible with Cherry MX stem.
€42.90 *
Sold Out
Oni Mask / Devil Keycap
The handpainted versions have a matt varnish (Premium Acrylic Polyurethane), to protect the paint. They are shipped in a aluminum Gift case. The "Primer" Version has a black/gray basecoat. You can paint it by your own. This...
From €13.90 *
Altyn / K6-3 Russian Spetsnaz Helmet Keycap (PUBG, Tachanka Helmet)
The handpainted versions have a matt varnish (Premium Acrylic Polyurethane), to protect the paint. The visor has a glossy varnish, to imitate glass. The "Primer" Version has a black/gray basecoat. You can paint it by...
From €13.90 *
Sold Out
Gateron Silent Switch 5 Pin brown/red/black
Black - 50g Linear Brown - 45g Tactile Red - 45g Linear These are PCB mounted switches (5pins). To use these as plate mounted switches (3pins), just cut the two plastic legs with a flush wire cutters.
From €0.60 *
Viewed