Products from Gateron

No results were found for the filter!
The Gateron Milky switches made of a different material than the normal (KS-8) Gaterons switches. They also have a deeper sound. Clear top housing Support 2 pin DIP RGB LED PCB mount Compatible with Cherry MX Stem Black - 60g Linear Blue...
From €0.35 *
Pre-lubed by factory 104% keyboard set (7x2U, 1x6.25U, 1x7U) Only the wire for the 7U stabilizer is included (you have to use the other parts from the 6.25U stabilizer) Installed on the top plate, not on the PCB
€11.00 * €16.00 *
V2 (no issue with loose leave) INK Red (linear) Pcb mount: Actuation: 50g Bottom: 67g Travel: 4 mm INK Yellow (linear) Pcb mount: Actuation: 60g Bottom: 67g Travel: 3.4 mm INK Blue (Clicky) Pcb mount: Actuation: 75g Bottom: 60g Travel: 4 mm
From €0.89 *
Sold Out
Sold Out
Black - 50g Linear Brown - 45g Tactile Red - 45g Linear These are PCB mounted switches (5pins). To use these as plate mounted switches (3pins), just cut the two plastic legs with a flush wire cutters.
From €0.60 *
Sold Out
Clear top housing Support 2/4 pin DIP RGB LED PCB mount (5Pins) Compatible with Cherry MX Stem Blue: 55g Clicky Brown: 45g Taktile Red: 45g Linear Black: 50g Linear White/Clear: 35g Linear These are PCB mounted switches (5pins). To use...
From €0.30 *
Viewed