Unfortunately, this product is no longer available
Similar products:
Sold Out
Plaid Keyboard Kit
Bootloader and VIA (VIAL compatible) keymap already flashed on the ATMEGA328p chip. VIAL Keyboard Configurator Solder parts on the pcb, connect it with a pc and start typing. Only through-hole components 4x12...
From €59.00 *
Sold Out
Emoji/Smiley - MX R4, OEM, ABS Etched, Backlight
Profile: OEM Material: ABS Backlight (Shine-Through) This keycap an be used at the red marked area (OEM).
€9.90 *
Low Stock
Planck compatible Carbon Top Plate for LO-PRO Case (ortholinear keyboard)
This carbon top plate fit's to the Planck Lo-Pro bottom case from OLKB . Supports MIT and GRID layout Compatible with Cherry MX keyswitches, and MX clones (Gateron, Kailh, Zealio …) Plate is 1.5 mm thick Material: Carbon...
From €25.90 *
Sold Out
HHKB Style Planck compatible Carbon Top Plate for LO-PRO Case (ortholinear keyboard)
This carbon top plate fit's to the Planck Lo-Pro bottom case from OLKB . Supports MIT and GRID layout Compatible with Cherry MX keyswitches, and MX clones (Gateron, Kailh, Zealio …) Plate is 1.5 mm thick Material: Carbon...
From €29.90 *
Sold Out
Crystal Artisan Keycap
This keycap is hand painted. The crystals have a transition from almost transparent to colored (top to bottom). It has a strong varnish (Premium Acrylic Polyurethane), to protect the paint. Compatible with Cherry MX stem.
€42.90 *
Sold Out
Oni Mask / Devil Keycap
The handpainted versions have a matt varnish (Premium Acrylic Polyurethane), to protect the paint. They are shipped in a aluminum Gift case. The "Primer" Version has a black/gray basecoat. You can paint it by your own. This...
From €13.90 *
Altyn / K6-3 Russian Spetsnaz Helmet Keycap (PUBG, Tachanka Helmet)
The handpainted versions have a matt varnish (Premium Acrylic Polyurethane), to protect the paint. The visor has a glossy varnish, to imitate glass. The "Primer" Version has a black/gray basecoat. You can paint it by...
From €13.90 *
Sold Out
Gateron Silent Switch 5 Pin brown/red/black
Black - 50g Linear Brown - 45g Tactile Red - 45g Linear These are PCB mounted switches (5pins). To use these as plate mounted switches (3pins), just cut the two plastic legs with a flush wire cutters.
From €0.60 *
Viewed