Skip to main content Skip to search Skip to main navigation
World wide shipping with tracking
14 days return policy
German Vendor
Trusted since 2017

ErgoDash Split Keyboard PCB

Product information "ErgoDash Split Keyboard PCB"

 

MX PCB:

  • includes 2x ErgoDash PCB  Rev1.2
  • compatible with Cherry MX switches and Mx Clonse like Gateron ... (not Choc)
  • solder parts not included (choose separate from drop down menu)

 

Parts Kit:

  • 70x 1N4148 diodes
  • 2x TRRS jack
  • 2x MJTP1117 switch
  • 70x 470Ω resistor (for key backlight leds)
  • 2x 1kΩ resistor (for key backlight leds)
  • 2x MOSFET IRLML6344TRPBF 30V 5A 1.1V (for key backlight leds)

 

What else do you need:

  • TRRS cable × 1
  • Micro USB cable × 1
  • Arduino Pro Micro × 2 or Elite-C
  • 66-70 MX switches
  • Keycaps
  • Optional: LED WS2812B × 24 (for underglow)
  • Optional: LED 1.8mm × 66-70 (for key backlight)

 

Build Guide

Photos of the completed keyboard are for demonstration purposes only.
Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.

PCB design by omkbd

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Safety information

EU responsible person: Keycapsss | Benjamin Rösner, Löhrstr. 11, 04105 Leipzig, Germany
Contact: Keycapsss.com

Accessory Items

No Brand

Average rating of 0 out of 5 stars

WS2812 RGB Led's 10PCS
Sold in packs of 10 (Quantity 1 = 10 led's).   WS2812C (fully compatible with WS2812B) Footprint: SMD 5050 (5x5mm) Wavelength: 620~625nm Red, 515~525nm Green, 465~475nm Blue Luminous Intensity (IF=20mA): 60mcd@5mA Red, 245mcd@5mA Green, 365mcd@5mA Blue Power supply voltage (VDD): +3.5~+5.3V Operation junction temperature: -25~+85 °C

From €2.40*

Similar Items

Keycapsss

Average rating of 5 out of 5 stars

CRKBD Split Keyboard PCB (Corne, Helidox)
  Switch led's (SK6812 Mini-E) are easier to solder, due to the flat leads You need 42x SK6812 Mini-E (switch rgb light) and 12x normal WS2812 5x5mm (underglow) for both sides North-facing switches (Choc South-facing) Pcb's not reversable anymore LeadFree HASL PCB surface finish   Variants  MX PCB: This is the standard V3.0.1 version of the CRKBD Split Keyboard PCB Includes 2x MX PCB v3.0.1 [Build Guide] Uses WS2812 LED for underglow This PCB version works only with Kailh MX Hot Swap sockets (PG1511) & Cherry MX and clone switches. You also need the Parts Kit (choose from drop down menu), 42x MX switches, 42x Kailh MX Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light) and 12x WS2812 5x5mm (underglow) for both sides.   Choc PCB: V3.2 Choc PCB with support for SK6812 Mini-E for per key LEDs (LED order are the same), NEW batterie solder points and optional on/off switch for wireless builds Includes 2x Choc PCB Uses WS2812 for underglow Support for Choc V1 and V2 switches You also need the Parts Kit (choose from drop down menu), 42x Choc switches, 42x Kailh Choc Hot Swap sockets, 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, MX or Choc Keycaps, OLED SSD1306 0.91 (optional), 42x SK6812 Mini-E (switch rgb light)and 12x WS2812 5x5mm (underglow) for both sides. Optional: 2x on/off switches for a wireless build   Light PCB: This is the Light V2.0.0 version of the CRKBD Split Keyboard PCB Includes 2x Light PCB v2.0.0 [Build Guide] Support for MX, Choc V1 and Choc V2 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away  No RGB LEDs, No Hot-Swap You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1/ChocV2 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, ...), TRRS(4 pole) cable, Keycaps, OLED SSD1306 0.91 (optional)   UltraLight: This is the UltraLight V2.0.0 version of the CRKBD Split Keyboard PCB (very similar to the Light PCB, but optimised for wireless builds) Includes 2x UltraLight PCB v2.0.0 Support for MX, Choc V1 and  Gateron KS-27 switches SMD or Through hole (easier to solder) diodes can be used Optional: outer column break away  No RGB LEDs, No Hot-Swap Support for an On/Off switch, battery JST socket and solder points for the nice!view You also need the Parts Kit (choose from drop down menu), 42x MX/ChocV1 switches, , 2x Pro Micro or Drop-In replacment (Helios, Puchi-BLE, Nice!Nano), Keycaps, Nice!View (optional) and 2x on/off switch   Parts Kit includes: 42x SMD Diodes 2x TRRS Jacks 2x Reset Switches 2x 4Pin Sockets (for Oled)   Photos of the completed keyboard are for demonstration purposes only.Please note that this pcb must be assembled (soldering) and does not include mcu, switches or keycaps.   PCB design by foostan UltraLight PCB design by Pete Johanson

From €8.00*